Pre-Delivery Inspection Report Need help? If you have questions relating to a warranty claim, please call or email our warranty administrators. T: 1-702-636-2969 Warranty Policy Pre-Delivery Inspection Report Form Complete information requested below. For a printable form, please click here. Equipment Information Serial No. (PIN) Model No. Inspection Date Hour Meter Machine StatusSoldRentalDemo Dealer Information Dealer Name Address City State Zip Phone Country Customer Information Customer Name Address City State Zip Phone Country Each Telescopic Handler must be inspected and if necessary, corrective action taken to ensure the machine is in proper and safe working order. This inspection must be performed before the machine is delivered to a customer, goes into rental, or is used as a demonstrator. Failure to complete this Pre-Delivery Inspection Report to Xtreme Manufacturing™ within 30 days will void the machine warranty. Please select one---Inspection SatisfactionFurther Action Required Engine ---InspectAdjust1.1 Oil level1.2 Cooland level1.3 Radiator for leakage1.4 Fan belt tension and condition1.5 Fuel system for leaks and dirt1.6 Air intake and pre-cleaner1.7 Exhaust system for leaks Hydraulic ---InspectAdjust2.1 Hydraulic tank level2.2 All hoses and lubes for leaks2.3 All cylinders for leaks or damage2.4 All hydraulic functions for proper operation2.5 Pumps and control valves for leaks or damage2.6 Oil cooler for leaks, dirt, or damage2.7 Transmission oil level2.8 Pressures set/adjusted Electrical ---InspectAdjust3.1 Battery charge3.2 Battery cables and terminals3.3 Starter operation3.4 Alternator operation3.5 All guages and lights3.6 Safety switches and park brake3.7 Optional electrical equipment Controls/Safety Equipment ---InspectAdjust4.1 Control levers4.2 Foot pedal (throttle)4.3 Foot pedal (brake)4.4 Parking brake4.5 Steering switches4.6 Seat belt operation4.7 Sway override switch4.8 Gauges (functional)4.9 Warning labels installed Grease/Lubrication ---GreaseLubrication5.1 Control levers5.2 Lift cylinder lift joints5.3 Tilt cylinder hinge joints5.4 Boom pins and rollers5.5 Axle king pin5.6 Axle trunnion mount5.7 Drive shaft U-joints5.8 Control handle5.9 Axle fluid levels General6.1 Control levers6.2 Lift cylinder lift joints6.3 Tilt cylinder hinge joints6.4 Boom pins and rollers6.5 Axle king pin6.6 Axle trunnion mount6.7 Drive shaft U-joints6.8 Control handle6.9 Axle fluid levels Corrective Action/Comments Your Email Per your express consent, all information collected on this form (including but not limited to name, contact information and location data) will be used for communication purposes only relating to products and services offered by Xtreme Manufacturing. The information you provide will not be distributed, disseminated or shared in any manner to any other person or entity. Please refer to our Privacy Policy for more specific details.
